Advantage Mezzanine Floors

Blog

Non-standard Pallets? – Non-standard Pallet Gate!

Non-standard Pallets?  –  Non-standard Pallet Gate!
Non-standard Pallets?  –  Non-standard Pallet Gate!
Just because your pallets are higher and wider than standard does not mean that you cannot have a safety pallet gate. Here at Advantage, we specialise in non-standard requirements. We can offer ‘up and over’ pallet gates to accommodate pallets of 1300mm to well over 3000mm in width, depths in excess of 2500mm and heights from 1800mm up to 3000mm.

We also offer chequer wearplates to suit which will protect the mezzanine floor when pallets are loaded. They extend 1400mm deep on the topside of the floor with a 100mm lip to the front edge.

All our pallet gates are approved by Health & Safety professionals. They ensure that there is never an exposed edge when pallets are loaded and offloaded. 'Sliding rail' edge protection for loading pallets is no longer considered acceptable.

According to ROSPA, falls from height are among the most common kinds of accident involved with fatal injuries.

The gate components are delivered on pallets for you to assemble and install on site but we do offer an installation service within a 150 mile radius of Worcester, where we are based.

Just call a member of our team for advice and a free no obligation quotation.



< Return to Blog