Building refurbishment at Norton Parish Hall, Worcester stripping out existing toilets and showers, internal block walls, tiled flooring and, replacing with new WCs meeting room and moveable concertina partitions. The scope also included provision of mesh steel partitions to create a new secure store and new concrete paths externally to the building.

• Designed to comply with all Building Control regulations whilst achieving the functional objectives of the Parish Council.
• Removed all internal block walls in the work area to create a new open plan space for the new build to be undertaken.
• Levelled the floor and laid new Karndean flooring.
• Built new stud and plasterboard walls within integral insulation to create new WCs and meeting room(s).
• Installed a new concertina sliding partition to allow for the reconfiguration of the meeting room.
• Installed new external windows to the meeting room.
• Building control approval undertaken by Advantage making the end to end process extremely straight forward for the customer.

Complete design and build of a small single skin steel partition office to complement existing steel partitions in the building. Located in
Worcester.

• 12m x 5m (60m2) Single skin steel partition office with glazing.
• Full CAD design.
• Upon design sign off, manufacturing was quickly undertaken and steel partitioning erected over several days.
• Once the perimeter partitions were installed the suspended ceiling was installed and finally all electrics were put in.
• Commissioning certificates were issued with all electrical installations.
• The project was finished on time and on budget.

• Complete design and build of a mezzanine floor in Cirencester designed for mixed classroom and storage use.
• 58m2 mezzanine floor
• Full CAD/CAM design with structural calculations.
• Designed to fit above an existing showroom area.
• Upon design sign off, manufacturing was quickly undertaken and steelwork erected over several days.
• Once the structure was built, it was then ’fire rated’ and suspended ceiling installed to comply with Building Control Regulations.
• The classroom was then built on top of the mezzanine using stud and plasterboard with insulation in the cavity. Windows and door installed along with the suspended ceiling.
• Building control approval undertaken by Advantage making the end to end process extremely straight forward for the customer.
• All our mezzanines are provided with CE mark certification and full loading and structural calculations.
• The project was finished on time and on budget

• Complete design and build of a mezzanine floor extension in Tewkesbury, together with follow on fire rating and fit out works.
• 56m2 mezzanine floor
• Full CAD/CAM design with structural calculations.
• Upon design sign off, manufacturing was quickly undertaken and steelwork erected over several days.
• Once the structure was built, it was ’fire rated’ and suspended ceiling installed to comply with Building Control Regulations.
• A ground floor kitchen and staff canteen was then created and a new WC fitted out.
• All our mezzanines are provided with CE mark certification and full loading and structural calculations.
• Building control approval undertaken by Advantage making the end to end process extremely straight forward for the customer.
• The project was finished on time and on budget.

• Reconfiguration of kitchen and adjoining office to create Covid friendly kitchen and staff break out area. The reconfigured kitchen area provided a new socially distanced seating area for breaks and mealtimes.
• Removal of existing office within the warehouse to provide increased storage space and better end use of that area.
• Reconfiguration of the existing large meeting room, reducing its size to create more open plan office space in the adjoining
  main office, allowing for expansion and increased social distancing.
• The fit out required some demolition works, block work, stud partitions and reconfiguring of suspended ceilings. Finally
  redecorating the works area and re-carpetting where needed.

• Each mezzanine 133m2
• Full CAD/CAM design with structural calculations.
• Designed to allow for offices to built on top with warehouse storage beneath.
• Extremely fast and efficient installation taking only 2 days for each mezzanine.
• CE mark certification issued upon completion.
• Project finished on time and on budget.

• Complete design and build of a mezzanine floor extension in Drakes Broughton, Worcestershire.
• 87m2 mezzanine floor, fire rated and tied in to an existing floor installed by Advantage some years earlier.
• Full CAD/CAM design with structural calculations.
• Extremely fast and efficient installation taking only 2 days.
• Mezzanine one hour fire rated on completion of the structural build to comply with Building Control Regulations.
• Building Control approval undertaken by Advantage making the end to end process extremely simple for the customer.
• CE mark certification issued upon completion.

Design supply and install of a storage mezzanine with a partitioned storeroom for a supplier of EMC shielding, thermal management and environmental protection for electronic and electrical equipment.

The Challenge

The company needed additional storage space and a new machine, which meant the mezzanine floor needed to be designed around the machine allowing access to the top for feeding. The underside had to be enclosed to provide a certain level of noise insulation to reduce the transference across the space. They also needed the ability to load and unload materials on to the mezzanine.

The Solution

The team designed a storage mezzanine with a partitioned storeroom, including an up and over pallet gate and a central cutout in the floor of the mezzanine providing access to the top of the machine. The partitioning below was stud plasterboard which concealed the machine and reduced the noise levels while the machine was running. The staircase was designed and installed inline with Part K of Building Regulations to allow access for employees. These regulations are a legal requirement to ensure they are safe and fit for purpose.

We work closely with all our customers from the outset to ensure their mezzanine is designed to meet the business’s needs and budget. All our mezzanine floors and other solutions are designed to meet building control regulations and where relevant come with a CE mark certification. We always offer to manage building control regulations but ultimately that is at the discretion of the customer. Picking a partner that will walk you through the legalities is key in ensuring your installation is safe and efficiently designed and fitted.

Talk to one of the team to start transforming or maximising your office or industrial space.

• Complete internal redesign and reconfiguration of composite offices in Worcester.
• Full CAD design layout to ensure exact placement of new covid friendly offices within an existing office space.
• Smaller single occupancy offices were designed in to an existing space providing a safe yet visually open and friendly, work
  environment
• Installation conducted over several days aimed at minimising disruption to the workplace so that daily activity could continue.
• In addition to the reconfiguration works, all electrical works were undertaken as part of the build ensuring compliancy throughout.
• All internal changes were made to comply with building control requirements.
• NEBOSH qualified HSE and project management
• The project was finished on time and on budget

• Complete design and build of a mezzanine floor in Hereford.
• 200m2 mezzanine floor
• Full CAD/CAM design with structural calculations.
• Designed for new build offices. within a warehouse environment
• Extremely fast and efficient installation over several days.
• Delivered on time and installation completed to schedule with no delays.
• All our mezzanines are provided with CE mark certification and full loading and structural calculations
• The project was finished on time and on budget